Brake pipes are really important. Without them, your brakes won’t work as well as they should, and you might not be able to stop in time for that red light that seems to sit there all day.
Brake pipe benders are the tools mechanics use to bend brake lines just to get them hooked upright. You’ll need a few different types of these things if you want to fix cars like an expert Mechanic.
But here’s what you’ll want for most jobs: A long-reach bender will come in handy when you’re trying to reach around something standing in the way of your line straightener.
It can also be used on longer sections of the tube than other models. The short-reach bender is best for tight spaces and quick fixes. It’s also suitable for use on shorter lines that need bending. Therefore, you need to get the best brake line bender according to your need, and that’s crucial.
Our top recommendations:
Best Brake Line Bender Review
Here we will review some of the best brake line benders that are available in the market.
1. Imperial Tool 470FH
Tubes can be hard to bend into the exact shape you need. The problem is that bending a tube requires a lot of strength, which makes it difficult for people with smaller hands or limited mobility to make tight bends without crossing their handles and risking injury.
Imperial Tool has developed an innovative new tool called the 470FH Tube Bender. This bender solves the problem by allowing users to easily create 180-degree bends using only one hand!
This revolutionary bender uses two-stage handle repositioning technology. So, you don’t have to cross your handles when bending long tubes. It’s also compact enough for use in small spaces like under vehicles or inside pipes where larger tools won’t fit. Plus, its cushioned grips provide comfort while reducing fatigue during extended use.
It also offers an “offset” option which lets you create offset angles up to 45 degrees from the centerline when making right-hand bends. Left-hand bends require no offsets since both handles begin at the centerline. So there’s no need for offsetting one handle away from the other as long as it remains centered over the tubing being bent.
- Two-stage handle repositioning technology
- Compact size for use in tight spaces
- Cushioned grips for comfort and reduced fatigue
- 180-degree bends without crossing handles
- Lower handle type helps make the tube bend completely
2. Wostore Tubing Bender
Copper, aluminum, and thin stainless steel pipes are difficult to work with because they tend to kink or break when you try bending them.The Wostore Tubing Bender is a simple tool that makes working with these materials easier than ever before.
You may consider this as one of the best stainless brake line benders. This tubing bender allows for 0-180 degree bends in 1/4″, 5/16″, and 3/8″ O.D. copper, aluminum, brass, and thin stainless steel pipes.
It features an ergonomic wide hook grip equipped with non-slip long knurled handles for easy use in any position, including overhead applications such as plumbing jobs and HVAC installations.
With the Wostore Tubing Bender, you can make perfect curves every time without breaking your wrist or straining your back while doing it! This tubing bender is sturdy enough to handle heavy-duty construction jobs but light enough that anyone can use it easily! You’ll be able to bend all types of copper and aluminum pipes and tubing without fear of kinking or breaking them.
- Can bend copper, aluminum, and thin stainless steel pipes
- Ergonomic wide hook grip with non-slip handle
- Ideal for plumbing, HVAC, and other construction jobs
- Bending angle 180 degree
3. LORESO Tube Bender
Many tube benders are difficult to use because they have a weak frame made of thin metal, which can bend and even break under pressure.
The LORESO Tube Bender is built with a sturdy cast iron frame that makes it nearly impossible for the machine to bend or break while in use. This means you can get your jobs done quickly and easily without worrying about the integrity of your equipment.
The LORESO 3 in 1 pipe bender is designed for professionals who need an efficient and reliable tool that can bend copper, brass, aluminum, or thin steel pipes. This pipe bender provides a fast, economical way to produce angled bends in round tubing from 0-180 degrees of angle.
This makes it ideal for all industries, including plumbing, HVACR, electrical work, and more! With its sturdy construction. This tube bender will be your most valuable asset on the job site.
No matter if you’re bending small diameter copper tubes or larger diameters of steel tubing. You’ll get consistent results every time with the LORESO tube bender. Because it is made with high-quality, heavy-duty materials that make it durable enough to last many years while being easy to operate, so anyone can use it!
- Cast iron frame is sturdy and durable
- Can bend copper, brass, aluminum, or thin steel pipes
- Bends tubes from 0-180 degrees of angle
- Ideal for plumbers, HVAC, and electrical engineers
4. OTC 6515 Tubing Bender
Copper and brass tubing can be tricky to bend because it’s hard to get the angle right. The OTC 6515 Tubing Bender is a simple but clever tool that makes bending copper or brass tubing easy. It works by clamping around the tube you want to bend and then twisting the handle until the desired angle is reached.
With this versatile 3-in-1 tubing bender set, you can make 180 degree bends in copper brass aluminum and steel tubing of 1/4″, 5/16″, or 3/8″. This bender will work on all kinds of metal pipes, including steel, aluminum, stainless steel, and even galvanized pipes!
The OTC 6515 Tubing Bender is an easy-to-use tool that allows you to easily and quickly bend round tubing. It requires no assembly. Plus, its durable design means it can handle heavy-duty use.
If you’re working on your car or in a shop where you need flexible tubing for some reason (like air conditioning lines), this tool will save you lots of time.
- Bender can be used on copper, brass, aluminum, and steel tubing
- 180 degree bends in the tubing of 1/4″, 5/16″, or 3/8″
- 3-in-1 tubing bender set for making professional bends
- 1-inch bend radius
5. ABN Brass Bending Tool Pliers
Working on your car can be a lot of fun, but it also involves dealing with some very hot and dangerous fluids. While you’re working under the hood or in the engine bay, there’s always a risk that you might accidentally splash yourself with high-temperature brake fluid or gasoline.
ABN has created this set of professional quality tools to help you work safely while protecting yourself from these common hazards. These brake line forming pliers are designed to make bending lines easy so that you can complete jobs faster than ever before! Their special design will not damage or distort existing lines, making them perfect for use on all types of brake and fuel line applications.
The heavy-duty forged steel construction means that this tool will last for years of use on the road or off-road. The comfortable handles make it easy even if you’re working with small hands or wearing gloves while working on your car repair project! You need this tool if you’re working with 3/16″ or 1/4″ diameter steel brake lines.
- The special design does not damage or distort lines
- Heavy-duty forged steel construction
- Comfortable handles made of alloy steel
- Fits all 1/4″ and 3/16″ lines
6. ION TOOL Tubing Bender
If you’re a professional in the plumbing, refrigeration, or HVAC industry, then you know how important it is to have the right tools for the job. That’s where ION TOOL comes in! They make top-quality hand tools for professionals like yourself who demand nothing but the best when they go to work every day.
This Tubing Bender has a comfortable handle and an easy-to-read gauge. So that you can get your job done quickly and easily without having to worry about breaking any expensive equipment while bending tubing. It’s perfect for use on automotive brake lines, cooling systems, refrigeration systems, plumbing applications, and more! This tool makes an excellent addition to any serious plumber or mechanic’s toolkit!
The ION TOOL Tubing Bender is an all-in-one tool that makes it easy to bend copper, brass, aluminum, and thin-wall steel tubing between 0 and 180 degrees without any kinks or sharp bends. It comes with anti-slip handles for comfort during use and an easy-to-read gauge that helps you get the perfect bend every time.
- Copper lines are measured by the outer diameter
- Easy to read gauge
- Made for round tubing
- Handle comes with anti-slip technology
7. Capri Tools Tube Bender
There are several tube benders that you can use, but they’re bulky and take up a lot of space in your toolbox or truck bed. The Capri Tools tube bender is designed for ease-of-use as well as portability, so it fits easily into any toolbox or glove compartment.
The Capri Tools Tube Bender makes it easy to bend the metal tubing into a variety of shapes for plumbing, electrical wiring, or other applications.It’s made with durable steel construction to ensure that it will last a lifetime. It bends copper, brass, and aluminum tubing from 1/8 inch up to 1/4 inches outer diameter (OD).
You can make tight bends on round small-diameter copper, brass and aluminum tubing using this bender from Capri Tools. Its compact design lets you work easily in tight spots, so you won’t have trouble getting the job done right!
The spring-loaded jaws make it simple to get the perfect bend every time. The built-in measuring scale ensures that you always have accurate measurements at your fingertips. So, you never have to guess how much more pressure needs to be applied before bending again.
- Spring-loaded jaws for simple, fast gripping
- Measuring scale ensures accurate measurements every time
- Bends at 45 and 90 degrees
- Bends up to 1/4 inches
8. Gino Development 02-0202 Pliers and Bender
Bending brake lines is hard work and can lead to car crashes.They all know that bending brake lines is dangerous, but it’s also a necessary part of the job for many people.
These pliers make it easy. The bender comes with an ergonomic handle and non-slip grip, so you don’t have to worry about dropping them while working on your vehicle or motorcycle. They’re designed specifically for bending 3/16″ and 1/4″ tubing without kinking or distorting the metal!
Just align the tubing, squeeze down on the handles, and twist in order to bend each side of your line into place! It’s that simple! This tool allows you to custom-fit brake line tubing while maintaining comfortable grips for less user fatigue.
They come in handy when installing new brake lines on your vehicle. But it can also be used for other applications where tubing needs shaping or forming. For example, HVAC systems and water heaters as well as custom projects around the house such as making copper pipe fittings and irrigation systems, among many other uses!
Be careful though, as it is sharp enough to cut through the thickest of tubing!
- Ergonomic handle and non-slip grip
- Designed specifically for bending 3/16″ and 1/4″ lines
- Bends both sides of the line in one motion
- The tool is 9″ long
9. Eastwood Triple Head Tubing Bender
Making your own brake, air conditioning, fuel, and transmission lines is an easy way to save money on vehicle repairs. However, it can be really hard to make those bends without a professional tool.
The Eastwood triple head tubing bender makes it easy to get professional-quality bends in 3/16”, 1/4”, 5/16” or 3/8″ tubing. This tool can make accurate 180 degree bends up to three times faster than traditional methods and with less effort!
The compact design makes it ideal for use in tight locations such as behind panels where space is limited. No more bending around corners! Simply slide the tube over one of the three heads, then bend it with a hammer until it’s at the desired angle.
If you’re serious about customizing your vehicle but don’t want to pay a premium price for professionally made parts that fit perfectly and look great on your ride, this is the tool you need. Save time and money by doing it yourself with a little help from the Eastwood triple head tubing bender!
- Precision bending of tubing in 3/16″, 1/4″ 5/16″ or 3/8″ diameters
- Accurate 180 degree bends in a fraction of the time
- Works with a variety of metals, including steel, aluminum, and brass
- Multiple head design is perfect for tight locations
10. Lisle 44150 Tubing Bender Pliers
Bending brake lines is a tricky job that requires brute strength and patience. If you’re like most people, your car breaks down at the worst times. You don’t have time to waste on this annoying task!
The Lisle 44150 Tubing Bender Pliers will solve all of those problems for you. These pliers are specially designed to bend 3/16 inch steel tubing without kinking or flattening it.
They also make bending brake lines easier because they have an extra-long handle distance (more than 3-1/4 inches apart). This makes them easy to use when working with tight spots in your car’s engine compartment or under the hood!
It doesn’t matter if you’re a professional technician or just someone who fixes their own cars from time to time; these pliers will be worth every penny spent on them!
These pliers are designed for working with various metal pipes and come with non-slippery grey handles. So that they fit comfortably in your hand while providing plenty of leverage on even thick-gauge metal pipes like those found in older homes’ water systems.
They also have a unique head design that provides more surface area to grip the metal pipe as you bend it, ensuring a cleaner and more precise bend every time.
- Can be used for 3/16″ steel tubing
- Handle distance is more than 3-1/4 inches apart
- The total length of the pliers is 7 inches
- The handles are made of non-slippery rubber
Buying Guide of Brake Line Bender
If you’re looking for a Best Brake Line Bender, there are a lot of choices out there. But with so many to choose from, how do you know which one is the best? There are a number of features you can look for when buying benders. Some of them may be unnecessary, but others will be important depending on your needs.
Ease of use
How easy it is to use the brake line bender can be a major factor in deciding which one to buy. If it’s difficult to use or has a confusing instruction manual, you may end up frustrated and not getting the best results. Look for one that is easy to use, even for those who don’t have a lot of experience with tools.
The line benders should be able to bend a variety of materials. This is important if you plan on using it for different projects or have a mixed collection of pipes and tubes in your home. It should also be able to bend metal like copper, steel, and brass tubing easily, without kinking it.
Types of brakes
Another consideration is the type of brake system you have. There are different brake line benders for disc and drum brakes, so make sure to get the right one if that’s what you need.
Types of benders
There are two main types of brake line benders: manual and hydraulic. The hydraulic ones tend to be more expensive but they’re also easier to use. So if you’re looking for the best possible result, this may be the option to go for.
Number of heads
When considering line bender take into consideration the number of heads it has. The more heads you have, the more material you can bend in one shot. So if you plan on doing a lot of different bends or if you need to bend different types of tubing, then this may be an important factor for you.
The size of the tubing you need to bend will also be a consideration. Most brake line benders will be able to handle 3/16 inch tubing, but some may go up to 1/2 inch. If you have larger tubes, then make sure the bender you buy can accommodate them.
The handles of the brake line bender should have a good grip so that you can keep control while you’re bending the metal. They should also be comfortable to hold, even for those who have smaller hands. The rubber handles are a good choice as they have a better grip and don’t cause blisters.
Size of pliers
The size of the pliers will also be important. If they are too small, you will have less leverage which means it’ll be more difficult to make the bends. But if they are too big, you may have trouble bending smaller pieces. So make sure it’s the right size for you and your needs.
Portable or not
How portable a line bender is will be a consideration as well. If you plan on going on a lot of different types of jobs, it can be helpful to have a lightweight and more compact bender. But if portability isn’t an issue for you, then this may be something that won’t matter much in your decision.
How Do You Use A Brake Line Bender?
It is generally common practice to use the brake line bender on automobile brake lines. This can be called bending brake tubing equipment.
In order to use a brake line bender to bend a tube perfectly, we need to follow these steps below:
1) Place the brake line bender onto the tube material you are trying to bend.
2) Slip the tube over the tool’s opposing jaw, ensuring that it is against its surface.
3) Tighten the clamps until they are securely against the tool’s frame. Set the angle you want to bend the tube with.
4) With hands pulling down on either end of the rubber tubing, begin bending until you meet the desired bend.
5) Once you have the desired bend, release the clamps and slide them down to tighten against the tubing.
6) Repeat these steps for any other bends that are required.
Finally, ensure that you adjust your brake line bender to fit your tubing size before using it on an actual job or project.
Frequently Asked Questions
These are some common questions and their answers about the brake line benders.
1. What is the easiest brake line to bend?
A: The easiest brake line to bend is generally the one with the least amount of wall thickness. This is because it takes less effort to bend and can be more easily manipulated. Keep in mind that you should still use caution when bending any brake line, as even the thinnest can be susceptible to damage from overbending.
2. How do you bend a 3/8 brake line?
A: To bend a 3/8 brake line, you will need to use a brake line bender that is designed for tubing with this size. The steps are generally the same as bending a brake line, but you should be sure to use torque clamps that are designed for 3/8 brake lines.
3. How do you make brake lines hard?
A: Heat or cold can make brake lines hard. If you heat it, the line will get stiffer and harder. If you leave brake lines in very cold conditions, it can make them hard as well.
4. How do you bend stainless steel brake lines?
A: Stainless steel brake line can be bent by heating the end of the lines. When heating, twisting the line makes it easier to bend in almost any direction. Also, you can use benders to make different line shapes.
5. What is the best way to avoid kinks in brake lines?
A: The best way to avoid kinks in brake lines is by using a brake line bender to bend the line and tubing. You can also avoid kinks by making sure you start and end your bends at the same point on the tube and by using a gentle bending motion.
Brake tubing equipment is perfect for bending hoses or tubes too rigid to fit into tight places. Because they’re generally very lightweight and easy to use. They also have clamps that tighten down on the tube material securely without damaging them or causing any leaks through joints that may develop over time.
If you are not getting one from the list, make sure you consult with a professional before making the purchase especially if you are a professional.